We don't have a radial tire in the size you need unfortunately. Only bias plys like the # AM1HP50 that you referenced.
For a 4 on 4 inch bolt pattern you would want the # AM3H370, for a 5 on 4-1/2 inch bolt pattern # AM3H490. view full answer...
I believe you meant the tire size 18/8.50-8 which we have as the Kenda K389 Hole-N-1 Bias Golf Cart Tire # AM40537 that doesn't have a wheel. Currently we do not have a tire with the size 18.5/8.50-8.
This tire has a load range B (815 lbs at 22 psi) with a section width of 8.5" and an overall outer diameter of 17.6" when inflated to 22 psi. view full answer...
We offer both bumper-mount and frame-mount types of RV hitches that are shown on the linked page. These have towing capacities that vary from 3500- to 6000-lbs and both bolt-on and weld-on models are available. In general, a frame-mount type will offer higher towing capacity.
You will want to check with the trailer maker using its VIN to confirm whether or not the bumper has enough strength to allow using it with a hitch for towing. The maker can also tell you the towing capacity whether... view full answer...
It sounds like you are looking for a hitch extender like the Curt Hitch Extender for 2" Hitch Receivers - 8" Long # C45791. Without knowing the length of extension needed, I have linked the page to all our 2 inch hitch extenders. You will want to note that using an extender will reduce the hitch's overall tongue weight capacity by 50%.
You may also be interested in a locking pin like # e98880 to secure your investment. These pins can be keyed alike. view full answer...
We offer a range of trailer jacks with either caster wheels or foot plates and these are offered in various capacities and with several different types of mounting configurations to suit a variety of trailers. The link provided will show you our main page for side frame-mount jacks, such as the 1000-lb-rated Pro Series # PSEJ10000101, which is a bolt-on swivel jack that fits trailer frames up to 3 x 5-inches.
We also offer swiveling caster wheels separately, such as Pro Series # PS1400750340,... view full answer...
The two pages I linked for you display the tire chains that fit your LT325/65R18 truck tires and your ST235/65R16 trailer tires.
For the ST235/65R16 trailer tires we have Glacier Square Link chains # PWH2329SLC or Titan Chain # TC1555. The latter is an S-Class chain that requires less clearance within the wheel well. If fender clearance is not an issue on the trailer either chain can be used for on-road use only.
For the Ford we have square-link chains from Pewag (parent company of Glacier)... view full answer...
All roof racks currently made for your 2018 Hyundai Ioniq, shown on the linked page, consist of two crossbars and the related foot assemblies.
But since you have a hitch support like the Malone Axis # MPG907 to hold one end of your canoe I do have a good solution for you that will cost much less.
We offer canoe carriers that do not require any roof rack crossbar. These cost-effective carriers include items like the Malone Canoe Carrier with Tie-Downs # MPG156. This kit includes 4 foam... view full answer...
Go To Results